It is not as difficult as it sounds to splice coaxial cable. Splicing coaxial cable is not difficult. Although it is easy to splice coax cable, you should be familiar with the process. You will need a few tools to splice the coaxial cable. These tools are easy to use and manage so that you can continue the process. This article will discuss how to splice coax cables professionally. Keep reading!
Before you start, it is important to identify the type of cable that you have. For the designation of the cable, check the markings on it.
A coax cable is essential for any wired or wireless communication system. It connects electronic equipment to antennas and connects various electronic devices. Coax cable manufacturers offer different coaxial cable types to support any application.
The most popular types of coaxial cables are RG6 or RG59. There are many other coaxial cables, but all are the same basic design. The easiest way to identify a cable is to cut it off and bring it to a hardware store.
Another option is to measure it. RG6 is a diameter. Two hundred seventy-four inches, while RG59 is a diameter.233 inches.
Now that you know the answers to these questions, it is time to put together the coax-splice kit.
This is how to do a successful splice:
- Coax cable cutter
- Coax compression connectors (if connectors are in your plans, skip this).
- Additional coax cable (if your plan is to extend the length).
- Coax compression device (again, only required if connectors are used)
- Barrel connector/splice adapter
Step # 1 – Strip the Cable
Coaxial cables are constructed differently from regular cables. Coaxial cables usually consist of a black vinyl outer cover, a metal mesh shield, and white dielectric insulation within the metal mesh.
Be careful not to cut the copper wires inside the cable when stripping it. While coaxial cable strippers are designed for this purpose, you can also use a knife to measure the length of the cable. After removing the cable, expose the copper wire and fold the metal mesh over the outer casing. The insulator should remain intact, as well as the copper wire.
Step # 2: Attach the connectors.
Each connector should be inserted onto the appropriate cable end, making sure not to damage the copper wire. Each connector should have a small amount of copper cable running beyond its end.
Step # 3 – Use the Crimping Tools
A coaxial crimping device should have settings that can handle both RG6 or RG59 cables. Choose the right setting and place the cable where it is marked. Crimp the other end and repeat.
Step # 4: Attach a barrel connector.
A barrel connector has male ends on each cable and a male cable end. Attach each cable end to the barrel connector using gentle inserting and tightening of the collar.
Always attach RG6 cables to RG6 cables when splicing a cable. Do the same for RG54. A splice can be weatherproof and will last indefinitely outdoors if done correctly.
You don’t have to hire someone to splice coax cables. Now you know how. You can complete the task in no time with just a few tools and materials. Check your coaxial cables if your TV is acting up or your internet slows down.